Car Wash in Thornton, CO Touchless & Self-Service

MINIMUM CREDIT CARD CHARGE IS $3 TO START SELF SERVICE BAYS

USING THE MAG AWAY/BUG REMOVER -  Select OPTION 1 (low pressure): Apply Mag Away/Bug Remover to entire vehicle using the low pressure gun. Mag Remover is great when your vehicle has accumulated magnesium chloride and salt/sand during the winter months or when you have bug accumulation during the summer months.  Use Mag Away/Bug Remover followed by Presoak (Option 3) and High Pressure Wash (Option 4) cycles.

USING TIRE-ENGINE CLEANER - Select OPTION 2 (low pressure): For best results, use the tire-engine cleaner first while the tires or engine is dry. This will allow the chemical to work without being diluted by water. After applying, let the chemical stand as long as possible while washing the rest of the car. The longer it soaks, the better it works.

USING PRESOAK - Select OPTION 3 (low pressure): Presoak will help clean your car if you do not want to brush it, or if it‘s very dirty. Just spray it on from bottom to top. This lets the dirtier areas soak longer. 

USING HIGH PRESSURE WASH (SOAP) - Select OPTION 4 (high pressure): Wash the car back and forth in sections to avoid missing areas. Hold spray a few inches from tires to clean whitewalls and lettering.

USING FOAM BRUSH - Select OPTION 5: Always wash dirt off car and brush (using the high pressure wand) before use to avoid scratching your vehicle’s paint. The foam brush will not scratch your car, but dirt will. Scrub lightly on paint from top to bottom. Brush the very bottom last to avoid picking up dirt or mud from the fender wells and scratching the paint.

USING HIGH PRESSURE RINSE - Select OPTION 6 (high pressure): Select RINSE, then rinse off the soap from top to bottom. 

USING CLEAR COAT CONDITIONER - Select OPTION 7 (low pressure): Apply tri-color Clear Coat Conditioner to entire vehicle using the low pressure gun. The Clear Coat Conditioner will help keep your vehicle clean between washes.

USING WAX - Select OPTION 8 (high pressure): Apply from top to bottom. The excess wax can be left on if you towel-dry the car, but should be rinsed off with Spot-Free Rinse (Option 9) to avoid heavy spotting.

USING SPOT-FREE RINSE - Select OPTION 9 (low pressure): Select SPOT-FREE RINSE, allow 10 seconds for line to clear, then rinse from top to bottom, pushing the water across the hood and roof. You can switch directly from WAX to SPOT-FREE, but always rinse off soap before using spot-free rinse. Spot-free is not a treatment or coating, but is very clean water that does not leave spots behind, so it should be the last step in the wash process.

USING AIR DRY - Select OPTION 10: Dry your vehicle from top to bottom for a drip free finish.

Clover’s Car Wash’s state-of-the-art equipment and technology is designed to effectively wash your car leaving it looking great wash after wash. However, please know that there are many factors that affect how well your vehicle is cleaned. These include: the condition of your car’s paint, how often you wash and wax your car, how dirty your car is when you bring it to the wash, outside temperature and humidity, how much time you spend focusing on areas that are extra dirty, and which car wash options you select while washing you car. We believe with regular care for your car’s finish, including regularly washing it at Clover’s Car & Dog Wash, it will always look “showroom new”.

WHEN YOU’RE FINISHED PRESS THE RED STOP BUTTON.